This Wesco 260093 Rais-N-Rol material lift set can be used for transporting heavy machines or furniture weighing up to 6,000 lb. Each of the two frames in this set has a hand-operated hydraulic jack that aids in lifting the load up to 6" from the floor and then safely lowering the load after it has been moved. The forks in the set can be adjusted from 6 to 19.5" between the inside edges of each fork. The frames measure 23 x 18.75 x 41.375 inches (W x D x H) and come with urethane swivel casters that measure 2.5 x 6 inches (W x Dia) and allow the load to be moved along a smooth surface in any direction. (W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back; H is height, the vertical distance from bottom to top; Dia is diameter, the distance from one side of a circle to the other.) The set has built-in delta ring and E-track connections for Wesco LB-1 and LB-2 load binders (not included). This material lift set is suitable for lifting and transporting heavy loads in industrial and commercial settings.
Material lifts typically comprise a vertical metal frame and two forks that can support a pallet of goods and that can be raised or lowered to an optimal, ergonomic height for loading or unloading. The forks may be controlled with a hand crank or a foot pump, and they can sometimes be inverted to adjust the service range. Wheels allow the material lift to be rolled for moving materials. Some material lifts have special wheels on the frame that can enable it to be loaded into a delivery truck for transport. Material lifts can be used in warehouses, storerooms, shipping facilities, and other industrial environments.
Wesco manufactures material handling equipment under the Wesco and Lexco brands. The company, founded in 1948, is headquartered in North Wales, PA.
Copyright © 2024 상지서비스. All Rights Reserved.