기타용품

본문 바로가기
TODAY VIEW
[해외]Pentek NCP-BB Carbon-Impregnated Polyester Filter Cartridge, 9-3/4" x 4-1/2", 10 Micron
기타용품
[해외]Pentek NCP-BB Carbon-Impregnated Polyester Filter Cartridge, 9-3/4" x 4-1/2", 10 Micron 요약정보 및 구매

상품 선택옵션 1 개, 추가옵션 0 개

제조사 Pentek
상품코드 n1539334050744
판매가격 45,000
적립금 0원
브랜드 Pentek 브랜드 바로가기
사이즈차트 사이즈차트
배송비결제 무료배송
필수 선택입니다.
옵션선택

- 해외에서 고객님께 직배송되는 구매대행 상품입니다.

- 주문확인으로부터 배송완료까지 약 7~20일 정도 소요됩니다.

- 해외주문완료~현지물류창고검수 중 반품 시 현지반품비용이 발생됩니다.

- 국제배송~배송완료 중 반품 시 현지반품비용+EMS비용+국내 택배회수비가 발생됩니다.

- 세관통과 후 국내택배 배송조회가 가능합니다.

- 현지상황이나 택배사 사정에 따라 배송기간이 연장될 수 있으며, 해외소싱사이트 세일 등 물량이 늘어나는 기간에는 평소 배송일보다 3~5일 이상 지연될 수 있습니다.

- 타쇼핑몰과 중복으로 해외구매를 할 경우 통관 날짜가 같으면 관/부가세가 부과됩니다. (비슷한 시기에 다른 사이트에서 해외 제품을 주문할 경우 통관일정이 겹칠 수 있습니다.)

- 단순변심에 의한 교환/반품의 경우 고객님 부담으로 교환/반품이 진행됩니다.(단, 상품이 개봉되었거나, 파손되었을 경우 반품 불가함)

- 오배송/불량/파손의 경우 구매후 1개월이내 환불/교환 가능합니다. (증빙자료 있을 시)
- 가전제품의 경우 해외배송상품은 110V 전압 상품입니다. 상품수령후 반드시 사용전압 확인후 변압기 등을 이용해 주시기 바랍니다.(전압 미확인에 따른 파손은 보상되지 않습니다)

- 주문이 완료되었더라도 간혹 해외 판매처의 품절 또는 가격인상 등으로 인해 구매가 진행되지 않을 수 있습니다. 이 경우 고객의사에 따라 별도의 환불안내를 드립니다.

위시리스트

상품 정보

단위환산기 수치를 입력하시면 자동환산됩니다. 사이즈 확인 시 참고하세요.
inch = cm
lb = kg
51BnqSExKvL.jpg
Pentek NCP-BB Carbon-Impregnated Polyester Filter Cartridge, 9-3/4" x 4-1/2", 10 Micron


61d3Zze31sL.jpg
Pack of 2

61AK%2BppcFvL.jpg
Pack of 3

61XvLLzITRL.jpg
Pack of 4

51BnqSExKvL.jpg
9-3/4" H x 4-1/2" W

Product Description

This Pentek NCP-BB carbon-impregnated polyester filter cartridge reduces sediment and chlorine taste and odor in residential and municipal drinking water. It has a nominal filtration rating of 10 microns at an efficiency of 85%. The filter will reduce free available chlorine (FAC) at 2 parts per million (ppm) by at least 50% in up to 500 gallons at a flow rate of 2 gallons per minute (gpm). The cartridge is made of carbon-impregnated polyester media pleated around a rigid polypropylene core with plastisol end caps for strength and resistance to bacteria. It has an initial pressure drop of 2 pounds per square inch (psi) at a recommended flow rate of 8 gallons per minute (gpm), and operates over a temperature range of 40 to 125 degrees F (4.4 to 51.7 degrees C). This filter cartridge is for use in rural, residential, and municipal drinking water purification.

Specifications

Nominal filtration rating 10 microns
Initial pressure drop at 8 gpm 2 psi
Chlorine reduction capacity 500 gallons at 2 gpm
Operating temperature range 40 to 125 degrees F (4.4 to 51.7 degrees C)
Maximum dimensions (H x W) 9-3/4 x 4-1/2 inches (248 x 114 mm)

The nominal filtration rating is for a particle removal efficiency of 85%. Chlorine reduction capacity is the minimum total amount of water for which the free available chlorine (FAC) at a concentration of 2 ppm is reduced by at least 50%.

H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.

Water filters remove undesirable particles, chemicals, and microorganisms from water by means of a semipermeable barrier, adsorption, or biological processes. They are made of densely packed synthetic or natural fibers that trap suspended particles, materials that block microbes or adsorb unwanted chemicals, or substances that cause a chemical change, such as acid neutralization. For most residential, commercial, and industrial applications, water filters are manufactured in the form of replaceable cartridges that fit inside permanent housings. Filtration systems typically consist of a series of two or more types of filters, each designed to remove different contaminants. The performance of filters is measured by the minimum particle size that is blocked, the percentage of particles or microorganisms that are removed, the downstream concentration of unwanted chemicals, the maximum flow rate, and the amount of water that can be filtered before the filter must be replaced. Water filters are used in a wide range of applications, including drinking water purification, swimming pools, industrial processes, and irrigation, among others.

Pentair manufactures industrial, commercial, and residential water filtration components and systems. The company, founded in 1966 and headquartered in Minneapolis, MN, meets International Organization for Standardization (ISO) standards 9001 and 14001 for quality assurance.


Feature

Reduces sediment and chlorine taste and odor in residential and municipal drinking water
Nominal filtration rating of 10 microns
Carbon-impregnated polyester media pleated around a polypropylene core for strength and resistance to bacteria
Initial pressure drop of 2 psi at a flow rate of 8 gpm
Temperature range of 40 to 125 degrees F (4.4 to 51.7 degrees C)
Brand : Pentek
Item model num : NCP-BB
MPN(PartNumber) : 155398-43
EAN : 0808112762409
Product Dimensions(LxWxH) : 12x12x25cm ; 703 g
Package Dimensions(LxWxH) : 26x12x12cm ; 703 g
do not remove - ntos connect log tag
구매 시 참고용으로만 이용해주십시오.
이 제품은 구매대행을 통하여 유통되는 제품임
이 제품은 「전기용품 및 생활용품 안전관리법」에 따른 안전관리대상 제품임

구매후기

구매후기

구매후기가 없습니다.

상품문의

상품문의가 없습니다.
상단으로
010-5482-4622
평일 AM 10:00 ~ PM 5:00
점심시간 PM 12:00 ~ PM 1:00
무통장입금안내
농협 302-5283-1377-21 이상지
해외 사이트에서 상품을 대량 소싱하는 쇼핑몰 특성상 일부 상품이 상표권 및 지적재산권을 침해하게 되는 경우가 발생할 수 있습니다. 고객센터로 연락주시면 최대한 빠르게 처리하겠습니다.
회사명 상지서비스 | 대표 이상지 | 주소 충남 천안시 동남구 성황로 40 111동 1703호 | 전화 010-5482-4622
반품배송지 31127 충남 천안시 동남구 성황로 40 111동 1703호 (TEL: 010-5482-4622)
사업자등록번호 678-17-00723
| 통신판매업신고번호 제2018-충남천안-0554호 | 개인정보보호책임자 이상지 (sangi0611@naver.com)
호스팅제공자 (주)스마일서브 | 서버소재지 서울시 금천구 가산디지털1로 33-33 대륭테크노타운 2차 2층

Copyright © 2024 상지서비스. All Rights Reserved.

글로벌셀러창업연구소인증 구매대행쇼핑몰
서울보증보험가입 공정거래위원회표준약관사용
K사다리